Lenze Engineer v2.21 - Manual (Page 175)

Lenze · Engineer · 2.13 EN - 10/2014
175
Defining the system functionality
Inserting & configuring a machine application
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
8.13.2 Port interconnection
Assigning applications
Via the Connections tab of a machine application you define, by means of assignment, which
applications are to exchange information within the machine application.
• Click in the Connections tab to display the following dialog:
• Each device already brings along an application which can be assigned to the machine
application, even if the respective application has not been fully defined.
• Not all applications of a project have to be assigned to the same machine application
necessarily.
• Apart from applications, also preconfigured machine applications can be assigned to a machine
application in order to set up hierarchical application structures like this.
8.13.2.1 Carrying out assignments

How to assign logic modules to an application:
1. In the field on the left entitled Available applications & machine applications, select the
application (or already existing machine application) that is to be assigned to the machine
application: