Lenze Engineer v2.21 - Manual (Page 205)

Lenze · Engineer · 2.13 EN - 10/2014
205
Inserting & configuring a network
Separation of the application and the network
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
9.1.2 Network level
On the network level, you can assign a network to the nodes created and parameterise it. If a
network object such as CAN has been selected in the project tree, the tabs displayed can be used to
make general settings.
Layout of the communication structure
If you create a new project, in the first step you describe the system structure by means of system
modules and axes and then add the corresponding devices to these structuring elements:
If you then change to the "Network" project view, only the existing structuring elements (system
modules and axes) as well as the included network-relevant components are shown in the Project
view: