Lenze Engineer v2.21 - Manual (Page 110)

Device functions with active online connection
Diagnostics
110
Lenze · Engineer · 2.13 EN - 10/2014
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
7.6 Diagnostics
With the »Engineer« you can carry out diagnostics of the device connected (if an online connection
has been established).

How to carry out diagnostics:
1. Select the corresponding device in the Project view.
2. If no online connection to the device has been established yet:
Click the icon or select the menu command Online  Go online to establish an online
connection to the device.  Going online ( 77)
3. Select the Diagnostics tab.
• When an online connection has been established, the Diagnostics tab shows the current
device parameters that are relevant for diagnostic purposes.
Example: Diagnostics for Servo Drives 9400 HighLine

Note!
The available diagnostics options for a device depend on the respective device and can
therefore only be explained here with an example!
Read the documentation supplied with the corresponding device before you start
working!
Button Function
 Show details of the current error.
 Show all active sources for the controller inhibit.
 Show all active sources for quick stop.
Resetting an error Acknowledge error message (if the error cause has been removed).
Logbook... Show logbook of the controller.