Lenze Engineer v2.21 - Manual (Page 57)

Lenze · Engineer · 2.13 EN - 10/2014
57
Mapping the system structure in the »Engineer« project
Inserting components
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
5.2.3 Inserting device modules
Optional device modules (such as memory modules, safety modules, function modules and/or
communication modules) can be inserted into the controller when a project is created or any time
later on.

Tip!
• The steps described in the following instructions must be carried out to replace the
device module assigned to a device by another device module.
• The Show latest version only option restricts the display of the search results to the
most up-to-date versions of the respective device modules.

How to insert device modules into a device:
1. In the Project tree, select the device the device modules are to be inserted into.
2. In the Toolbar, click on .
• The device modules assigned to the device are visible.
• Select ... / Delete desired device modules.
3. Click the Complete button to insert the device modules into the controller.
• The inserted device modules are visible in
the Project tree below the device.