Lenze Engineer v2.21 - Manual (Page 235)

Lenze · Engineer · 2.13 EN - 10/2014
235
Catalogue management in the »Engineer«
Use of catalogues in projects
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
If a project is opened which contains damaged elements, a reference dialog box will pop up: "The
following project elements cannot be opened because the required catalogues have not been
installed:..."
After you have clicked the Details button for the corresponding project element, the Element profile
tab appears.  Properties tab ( 236)
• Damaged elements appear with a symbol and the original designation in the project tree.
• Damaged elements cannot be opened in the project view.
Button Function
Next Open project:
Changes to the project:
Damaged elements are removed from the project. Instead, damaged
elements are displayed for which only the Properties dialog boxes are visible.
References to damaged elements existing in other project elements are also
removed. If a damaged element is, for instance, a device, this device now no
longer is a node in the network. The application of the node is removed from
the machine application.
Cancel Cancel the opening of the project
The saved project is not changed. You can install the missing catalogue
subsequently and open the project again without losing information.

Note!
Damaged elements are permanently removed from the project. To avoid unintended
information loss, you can save the project subsequently via the menu command
FileSave as.
If you install the missing catalogues later, you can then reopen the original project.