Lenze Engineer v2.21 - Manual (Page 214)

Inserting & configuring a network
ETHERNET Powerlink network
214
Lenze · Engineer · 2.13 EN - 10/2014
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
9.3.1.2 Node settings
Configuration options in the network view
You can change the address of a node, its name and the designation of the device directly in the
Network view.

How to change a setting in the network view:
1. Click into the corresponding text field to change the respective setting:
2. Press to accept the change.
Further configuration options
Further settings with regard to a node can be carried out via the Properties, Settings and Diagnostics
tabs.

How to define the further settings of a node:
1. Select the node to be configured in the Network view.
• In the network view a selected node is highlighted by a green frame.
2. In the Network toolbar, click the icon.
• The »Engineer« switches to the network view
3. Carry out the corresponding node settings in the Settings, Properties, Monitoring,
Diagnostics and Process data objects tabs.
• The information can be found in the "ETHERNET Powerlink" Communication Manual.
• Via the icon in the Toolbar you can go back to the settings of the network.
9.3.1.3 Removing nodes

Click the icon in the Network toolbar to remove the selected node from the network.