Lenze Engineer v2.21 - Manual (Page 142)

Defining the system functionality
Parameter setting in the »Engineer«
142
Lenze · Engineer · 2.13 EN - 10/2014
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
The following information is visible below the parameter list:
Show parameters numerically.
Only show parameters the comparison values of which are different in
column A and column B.
Mask out all parameters featuring a read only access.
Mask out all parameters which are available either in column A or in column
B (added or omitted).
Export current parameter view to a file.
• File formats:
• *.csv (Comma-Separated Values")
• *.gdc (Lenze »Global Drive Control« (GDC)
Show print view of the parameter view
Print parameter view
Information Meaning
Parameter: Value Parameter name (code) with the stored value,
Example: Identify system: User name
PC value Value in the »Engineer« project, example: PC value: User
Value in the device Value which is stored in the device, example: Device value: Lenze
Default setting Preset default setting, example: Default setting: Guest
Icon Function