Lenze Engineer v2.21 - Manual (Page 132)

Defining the system functionality
Parameterising & configuring the devices
132
Lenze · Engineer · 2.13 EN - 10/2014
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
8.4 Parameterising & configuring the devices
If you select a device in the Project view, different tabs are provided to you in the Workspace, via
which you can parameterise, configure, and diagnose the device.

Note!
The tabs provided for a device and the possible settings resulting therefrom are device-
specific and therefore are only explained by means of examples here!
Also read the documentation supplied with the corresponding device before you start
working!
Different licence levels are available for the Engineering tools of Lenze. Depending on
the licence level used, the functional range varies on the user interface. Current
information can be found at: http://www.Lenze.com
Tab This tab serves to ...
Application parameter ... parameterise the application assigned to the corresponding device.
 Parameterising the application ( 146)
FB Editor
(device-dependent available)
... reconfigure the application by means of a corresponding function block
interconnection.
 Function block editor (FB Editor) ( 149)
Terminal assignment ... configure the digital and analog input/output terminals of the device.
 Configuring the terminal assignment ( 144)
Ports ... add ports to an application to enable data exchange with other applications.
 Port editor (ports) ( 155)
User menu ... create an individual parameter list with frequently used parameters.  User menu
( 170)
Diagnostics ... carry out a diagnostics of the prevailing device when an online connection has
been established.  Diagnostics ( 110)
Data logger ... record the temporal course of parameter values.  Data logger ( 111)
Oscilloscope
(device-dependent available)
... use an integrated oscilloscope function for supporting commissioning,
maintenance and troubleshooting.  Oscilloscope ( 127)
All parameters ... display/edit all parameter settings of the device.
 Parameter setting in the »Engineer« ( 134)
Product features ... show information on the device.
• The Catalogue information shows the information for the device stored in the
»Engineer« catalogue.
• The Physical component shows the information read from the device, which is
available when an online connection has been established.
Documentation ... add notes and file attachments to the device.
 Documentation - Add project details ( 71)