Lenze Engineer v2.21 - Manual (Page 16)

User interface
Toolbar
16
Lenze · Engineer · 2.13 EN - 10/2014
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Insert  Application  Inserting application ( 55)
Insert  Network  Inserting a network ( 207)
Insert  Machine application  Inserting a machine application with a port
interconnection ( 174)
Going online/offline
Online  Go online Establish a connection to a device
 Going online ( 77)
Online  Go offline Break the connection to a device
 Going offline ( 96)
Online  Optical location Device search function (signalling via device LEDs)
 Optical tracking - device identification within the machine
( 107)
Online  Manual control Manual control (available depending on the device)
• Can only be activated if one device is selected and the
device supports this function.  Manual control of the
motor direction of rotation: Rotating the axes manually
( 109)
- Commissioning wizard for guided commissioning of
controllers of the 8400 device series
• ... is available in case there is an active online connection
to the device.  Going online
Device functions with active online connection
Online  Enable controller

 Safety instructions ( 12)
Enable device (cancel controller inhibit)
 Enable controller ( 100)
Online  Inhibit controller Inhibit device (set controller inhibit)
 Inhibit controller ( 101)
Online  Start application

 Safety instructions ( 12)
Start application in the device
 Start application ( 101)
Online  Stop application Stop application in the device
 Stop application ( 101)
Application / parameter transfer
Online  Download program Download application to the device
 Download program to device ( 103)
Online  Download parameter set Download parameter set to the device
 Download parameter set to device ( 105)
Online  Upload parameter set Upload parameter set
 Upload parameter set ( 106)
Online  Save parameter set Save parameter set in the device safe against mains failure
 Save parameter set ( 107)
Icon/button Menu command Function