Lenze Engineer v2.21 - Manual (Page 292)

Appendix
Creating cam data with the »Cam Editor«
292
Lenze · Engineer · 2.13 EN - 10/2014
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
14.3.2.7 Creating position markers
A position track can contain up to eight position markers, which do not necessarily have to rest on
the curve. Each position marker is identified with the number of the respective function block
output:

How to add position markers to a position track:
1. Select the cam position to be edited in the Project tree of the »Cam Editor«.
2. Select the command Draw  Position marker.
3. Move the mouse pointer in the Worksheet to the desired coordinates and press the left
mouse button.
• The position marker is inserted at the position of the mouse pointer.
4. Double-click on the position marker in order to open the Properties dialog box:
5. Set the exact coordinates of the position marker.
6. Click OK in order to accept the settings and close the dialog box.