Lenze Engineer v2.21 User Manual
Page 2
Target group
This documentation is intended for all persons who want to use the »Engineer«
engineering software to parameterise, configure and diagnose field devices and control
systems.
Screenshots/application examples
All screenshots provided in this documentation are application examples. Depending on
the firmware version of the Lenze devices and installed engineering tools (here: Lenze
»Engineer«), the representation may differ from the actual screen display.
Information regarding the validity
The information in this documentation is valid for the following Lenze software:
Document history
Software
From version
»Engineer«
2.19
Version
Description
2.12
10/2013
TD11
Updated contents for the »Engineer« V2.19 software version
2.11
11/2012
TD11
Updated contents for the »Engineer« V2.17 software version
2.10
05/2012
TD11
Updated contents for the »Engineer« V2.16 software version
2.9
11/2011
TD11
Updated contents for the »Engineer« V2.15 software version
2.8
04/2011
TD11
Updated contents for the »Engineer« V2.14 software version
2.7
11/2010
TD11
Updated contents for the »Engineer« V2.13 software version
2.6
04/2010
TD11
Updated contents for the »Engineer« V2.12 software version
2.5
10/2009
TD11
Updated contents for the software version »Engineer« V2.10 SP3
2.4
08/2009
TD11
Managing cam data with the »Cam Manager« ( 272)
2.3
04/2009
TD11
Optimised structures, update of dialog boxes & extension by new functions
of »Engineer« V2.10:
• Data logger
• Compare and copy parameter sets
2.2
11/2008
TD11
Extended by new functions of »Engineer« V2.9:
• L-force Loader Export, optimised menu control, device data update and
establishing an online connection.
• New chapter "Handling catalogues".
2.1
07/2008
TD11
Extended by new functions: User motors, Cam Manager, Cam Editor
2.0
10/2007
TD16
First edition