Lenze Engineer v2.21 - Manual (Page 51)

Lenze · Engineer · 2.13 EN - 10/2014
51
Mapping the system structure in the »Engineer« project
Inserting components
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
5.2 Inserting components

Tip!
Divide the real machine structure into functional subsystems which are structured by
means of system modules
and axes in the »Engineer«.
Then, insert the desired components inside the system modules/axes into the project
structure.
Applications & device modules
When entering a controller, insert the respective application as well.  Inserting application
( 55)
Optionally, device modules can be inserted into the device.  Inserting device modules ( 57)

Tip!
When inserting an axis, you can select the components of the axis if you ...
• ... activate the Select individual components of axis control field in a first step and
• ... then select the corresponding components.
 Inserting an axis ( 48)
Component Example Icon Description
Controller  Inserting controllers ( 53)
Motors  Inserting a motor ( 58)
I/O system  Inserting an I/O system ( 60)
Power supply module  Inserting a power supply module
( 63)
Remote maintenance  Inserting the remote maintenance
( 66)