Lenze Engineer v2.21 - Manual (Page 171)

Lenze · Engineer · 2.13 EN - 10/2014
171
Defining the system functionality
User menu
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
8.12.1 Configuring the user menu

How to configure the user menu:
1. Change to the User menu tab in the Workspace.
2. Click the Change user menu button.
3. In area  select the parameters to be exported by using the arrow key /undoing the
selection by using the arrow key . In order to remove all parameters from the monitor
window, use the double arrow key .
As an alternative, press the button to open a GDC file which includes the required
parameter selection.
• In order that only certain parameters are visible in the area , activate the corresponding
filter options
• Activate the in menu groups control field to arrange the parameters according to menu
groups.
• Multi-selection of parameters shown one above the other:
Hold down the key and highlight the parameters.
• Multi-selection of individual parameters:
Hold down the key and highlight the desired parameters individually.
• Area  shows the parameters selected to be transferred to the user menu.
4. A configured user menu can be saved as a file in the  field using the Export button (*.epc)
file to import the parameter selection into another »Engineer« project.
5. Click the OK button to accept the configuration and close the dialog window.