Lenze Engineer v2.21 - Manual (Page 270)

Appendix
Export data
270
Lenze · Engineer · 2.13 EN - 10/2014
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

Tip!
The parameters of a single device can be directly exported to the desired device via right-
click, command: ExportParameter values
It is possible to copy a device parameter via right-click in the CSV format to the clipboard.
This option is also available if there is an online connection to the device, command: Copy
parameter in the CSV format
14.1.4.1 Export all device parameters /Export individual parameters across devices
This command serves to export device parameters to a file for a single or several devices at the same
time. Result: A file with multi-device parameters or all parameters from all inserted devices.
For this purpose, select the desired parameters of the single devices or all parameters from all
devices in the following dialog box.

How to export the single parameters of several devices/all parameters of the devices of a
project:
1. Select project root
2. Call the ExportDevice parameters command via right-click. Alternative call:
FileExportDevice parameters
• Select single parameter: Mark the desired parameter/use the arrow keys to transfer
them to the selection.
• Activate the All parameters control field to export the parameters from all devices
entered in the project tree to a file.
3. Select memory location/file format
4. Click OK to save the file.

Note!
In order to be able to export the parameters of a device, the device has to be "offline".