Brocade Network Advisor IP User Manual v12.3.0 - Manual (Page 934)

882 Brocade Network Advisor IP User Manual
53-1003153-01
Configuration snapshots
24
Configuration snapshots
The Configuration File Manager dialog box - Configuration Snapshots tab, allows you to compare
two configuration snapshots; for example, the pre-configuration and post-configuration snapshots.
1. Click the IP tab.
2. Select Configure > Configuration File > Configuration File Manager.
3. Click the Configuration Snapshots tab.
The Configuration Snapshots tab displays, as shown in Figure 350 .
FIGURE 350 Configuration File Manager dialog box - Configuration Snapshots tab
The Configuration Snapshots tab displays the following information:
• Product Name — The name of the product
• Product Snapshots — The product snapshots
• Date — The date when the snapshot file was stored in the server
• Snapshot Type — The type of snapshot generated. There are three types:
 Manual: Generated manually by clicking the Save Snapshot button on the Backup
Configuration Manager.
 Pre-Snapshot: Generated before the new configuration was deployed to the device.
 Post-Snapshot: Generated after the new configuration was deployed to the device.
ZONE-1042 LOG The effective configuration has been disabled.
ZONE-1043 LOG The Default Zone access mode is set to No Access.
TABLE 86 Configuration change events for Adaptive backup (Continued)
Message ID Type Description