Top port alignment errors monitor – Brocade Network Advisor IP User Manual v12.3.0 User Manual
Page 291
Brocade Network Advisor IP User Manual
237
53-1003153-01
Dashboard customization
7
Top Port Alignment Errors monitor
The Top Port Alignment Errors performance monitor displays the top ports with alignment errors in
a table.
The Top Port Alignment Errors performance monitor includes the following data:
•
Widget title — The name of the widget.
•
View Details icon — Click to launch the Detailed View page.
•
Widget summary — The product count for each status (worst to best) displays underneath the
widget title.
•
Top value — The highest value in the table.
•
Port — The port affected by this monitor. Click to launch the Port Page (refer to
on page 276). When you launch the Port page, the detailed view closes.
•
Connected_Port (where Connected_Port is Connected Port, Initiator, or Target) — address of
the port:
•
Alignment Errors — The number (error count) of alignment errors for the duration specified in
the monitor.
•
Alignment Errors/sec — The number (error rate) of alignment errors per second for the duration
specified in the monitor.
Viewing additional details for the Top Port Alignment Errors monitor
1. Click the View Details icon.
A more detailed widget displays which includes the following data:
•
Scope — The scope configured for the dashboard.
•
Port — The port affected by this monitor. Click to launch the Port Page (refer to
on page 276). When you launch the Port page, the detailed view closes.
•
Connected_Port (where Connected_Port is Connected Port, Initiator, or Target) — Displays
the address of the port:
•
Alignment Errors— The number (error count) of alignment errors for the duration specified
in the monitor.
•
Alignment Errors/sec — The number (error rate) of alignment errors per second for the
duration specified in the monitor.
•
Product — The product affected by this monitor.
•
Type — The type of port (for example, U-Port).
•
Identifier — The port identifier.
•
Port Number — The port number.
•
State — The port state (for example, Enabled).
•
Status — The port status (for example, Up).
2. Click the close (X) button.
Top Port C3 Discards monitor
The Top Port C3 Discards monitor displays the top ports with Class 3 frames discarded in a table.
There are four port widgets: All, ISL, Initiator, and Target.
The Top Port C3 Discards monitor includes the following data: