Brocade Network Advisor IP User Manual v12.3.0 - Manual (Page 221)

Brocade Network Advisor IP User Manual 167
53-1003153-01
Software Configuration
5
FIGURE 68 Options dialog box (IP Preferences pane)
3. Select the ConfigReadFlash check box to obtain configuration backup from flash.
Clear the check box to obtain configuration backup from DRAM. The default is clear (disabled).
4. Enter the number of configurations to retain per product in the ConfigsRetainedPerProduct
field.
The maximum is 30 and the minimum is 5. The default is 20. When the system reaches the
maximum limit for a product, the oldest configuration is deleted and the new configuration is
saved. However, if a baselined configuration becomes the oldest configuration, the baselined
configuration is retained.
5. Select the DoBackupAfterResync check box to turn on product configuration backup after
re-synch is performed from the client.
6. Select the DoAdaptiveBackupForNOS check box to turn on product configuration backup after
every lazy polling interval time from the client.
7. Select the DoBackupOnRunningConfigChangeTrap check box to turn on product configuration
backup after receiving a running configuration change trap.
8. Select the DoBackupOnStartupConfigChangeTrap check box to turn on product configuration
backup after receiving a startup configuration change trap.
9. Select the DoPostdeploymentBackup check box to turn on product configuration backup after
a payload is deployed using the Configuration Wizard.
10. Select the DoPredeploymentBackup check box to turn on product configuration backup before
a payload is deployed using the Configuration Wizard.