Brocade Network Advisor IP User Manual v12.3.0 - Manual (Page 400)

348 Brocade Network Advisor IP User Manual
53-1003153-01
Performance monitors
8
Top Port C3 Discards RX TO monitor
The Top Port C3 Discards RX TO monitor ( Figure 154 ) displays the top ports with receive Class 3
frames received at this port and discarded at the transmission port due to timeout in a table.
FIGURE 154 Top Port C3 Discards RX TO monitor
The Top Port C3 Discards RX TO monitor includes the following data:
• Severity icon/monitor title — The worst severity of the data based on the error count shown
next to the monitor title.
• Port — The port affected by this monitor.
• Connected_Port_Link (where Connected_Port_Link is Connected Port, Initiator, or Target) —
Displays one of the following:
- Connected Port — The ISL or IFL port on the connected device. Click to launch the switch
port properties dialog box.
- Initiator — The initiator port on the connected device. Click to launch the device properties
dialog box.
- Target — The target port on the connected device. Click to launch the device properties
dialog box.
• C3 Discards RX TO/sec — The number (error rate) of Class 3 frames received at this port and
discarded at the transmission port due to timeout errors per second for the duration specified
in the monitor.
• C3 Discards RX TO — The number (error count) of Class 3 frames received at this port and
discarded at the transmission port due to timeout errors for the duration specified in the
monitor.
• C3 Discards — The number of Class 3 frames discarded.
• Product — The product affected by this monitor.
• Type — The type of port (for example, U-Port).
• Identifier — The port identifier.
• Port Number — The port number.
• State — The port state (for example, Enabled).