Brocade Network Advisor IP User Manual v12.3.0 - Manual (Page 930)

878 Brocade Network Advisor IP User Manual
53-1003153-01
Change tracking
24
NSM-2006 DCE Indicates that the specified port-profile has been removed successfully.
NSM-2007 DCE Indicates that the port-profile configuration mode has been enabled on the
specified interface using the port-profile-port command.
NSM-2008 DCE Indicates that the port-profile configuration mode has been disabled on the
specified interface using the no port-profile-port command.
NSM-2012 DCE Indicates successful association of the virtual machine (VM) media access
control (MAC) address with the specified port-profile.
NSM-2013 DCE Indicates successful disassociation of the virtual machine (VM) media access
control (MAC) address from the specified port-profile.
NSM-2014 DCE Indicates that the VLAN sub-profile has been created successfully.
NSM-2015 DCE Indicates that the untagged VLAN has been configured for the specified
port-profile.
NSM-2016 DCE Indicates that the untagged VLAN has been removed from the specified
port-profile.
NSM-2017 DCE Indicates that the switching properties have been configured on the specified
port-profile using the switch port command.
NSM-2018 DCE Indicates that the switching properties have been removed from the specified
port-profile using the no switch port command.
NSM-2019 DCE Indicates that the specified mode has been configured for the port-profile
using the switch port mode command.
NSM-2020 DCE Indicates that the specified mode has been removed for the port-profile using
the switch port mode command.
NSM-2021 DCE Indicates that the specified tagged VLANs are configured in the VLAN
sub-profile.
NSM-2022 DCE Indicates that the specified tagged VLANs have been removed from the VLAN
sub-profile.
NSM-2023 DCE Indicates that except for the specified tagged VLANs, all other tagged VLANs
are configured in the VLAN sub-profile.
NSM-2024 DCE Indicates that all the available tagged VLANs are configured in the specified
VLAN sub-profile.
NSM-2025 DCE Indicates that all the available tagged VLANs have been removed from the
specified VLAN sub-profile.
NSM-2026 DCE Indicates that the native VLAN has been configured for the specified
port-profile.
NSM-2027 DCE Indicates that the native VLAN has been removed from the specified
port-profile.
NSM-2028 DCE Indicates that the Fibre Channel over Ethernet (FCoE) sub-profile has been
created for the specified port-profile.
NSM-2029 DCE Indicates that the Fibre Channel over Ethernet (FCoE) port has been
configured for the specified port profile.
NSM-2030 DCE Indicates that the Fibre Channel over Ethernet (FCoE) port has been removed
from the specified port-profile.
NSM-2031 DCE Indicates that the specified port-profile has been created successfully.
TABLE 86 Configuration change events for Adaptive backup (Continued)
Message ID Type Description