Brocade Network Advisor IP User Manual v12.3.0 - Manual (Page 423)

Brocade Network Advisor IP User Manual 371
53-1003153-01
User-defined performance monitors
8
• To reset to the default color, click Reset.
5. Click OK to save your changes.
User-defined performance monitors
You can customize performance monitors specific to your needs. You can define up to 100
performance monitors; however, you can only display up to 30 performance monitors at a time.
Monitor types
You can create the following types of monitors:
• Top N (Products, Ports, and Traffic Flows monitors) — Displays the top number of products,
ports, or traffic flows for the selected measure in a table.
• Bottom N (Products, Ports, and Traffic Flows monitors) Displays the bottom number of
products, ports, or traffic flows for the selected measure in a table.
• Distribution (Products and Ports monitors) — Displays the number (distribution) of products or
ports for each of the five percentage ranges defined for the selected measure in a bar graph
• Time Series (Products, Ports, and Traffic Flows monitors) — Displays the selected measures for
products, ports, or traffic flows in a chart.
• Top N sFlows — Displays the top sFlow for MAC, IP, VM, or VLAN based on available flow data in
a table.
• Performance graph — Displays the configured performance graph on the dashboard.
Measures
Depending on the object (products, ports, traffic) you want to monitor, you can choose from the
following measures:
• Product
- Memory Utilization Percentage — The memory utilization percentage for the product.
- CPU Utilization Percentage — The CPU utilization percentage for the product.
- Temperature — The temperature in Celsius for the product.
- Fan Speed — The fan speed in RPM for the product.
- Response Time — The response time in seconds for the product.
- System Up Time — The system up time in days for the product.
- Ports Not In Use — The number of ports not in use for the product.
- Ping Packet Loss Percentage — The ping packet loss percentage for the product.
- AP Client Count — The number of AP clients for the product.