Viewing product group properties, Viewing test, Results – Brocade Network Advisor IP User Manual v12.3.0 User Manual
Page 180: Viewing test results
126
Brocade Network Advisor IP User Manual
53-1003153-01
Product group overview
4
Viewing test results
To test the group criteria, click Test. The Management application uses the group criteria to search
the available products in your AOR. The products that meet the criteria display in the Test Results.
table. This table includes the following details:
•
Group/Product — The name of the product or product group.
•
Name — The name of the product.
•
IP Address — The IP address (IPv4 or IPv6 format) of the product.
•
Product Type — The type of product.
•
Serial # — The serial number of the product.
•
Status — The status for the product and the port.
•
Vendor — The name of the product’s vendor
•
Model — The model number of the product.
•
Port Count — The number of ports on the product.
•
Firmware — The firmware version of the product.
•
Build Label — The firmware build number.
•
Location — The physical location of the product.
•
Contact — The name of the person or group you should contact about the product.
•
Description — The description of the product.
•
VLANs property — The list of VLAN ids of the product.
•
User_defined_property1 (up to 3) — A user-defined product property value. You can create up
to 3 user-defined properties (refer to
Viewing product group properties
To view group properties, complete the following steps.
1. Select Network Objects from the view list on the Product List toolbar.
2. Right-click the product group you want to view properties for in the Product List and select
Properties.
The Product Group Properties dialog box displays.
3. Review the information:
TABLE 15
Product Group Properties fields and components
Field/Component
Description
Properties tab
Select to display information about the group.
Name
The unique name (maximum 64 characters) for the product group.
Description
The description (maximum 255 characters) for the product group.
Creator
The user name of the creator (for example, Administrator).
Topology Display
Whether or not topology display is enabled.
Dynamic Group
Whether or not this is a dynamic group.
Products tab
Select to display information about products in the group.