Brocade Network Advisor IP User Manual v12.3.0 - Manual (Page 176)

122 Brocade Network Advisor IP User Manual
53-1003153-01
Product group overview
4
• User_defined_property1 (up to 3) — A user-defined product property value. You can create up
to three user-defined properties (refer to
“Properties customization” on page 1473).
Creating a dynamic product group
To create a dynamic product group, complete the following steps.
1. Select Network Objects from the view list on the Product List toolbar.
2. Select Add Product Group > Dynamic from the Grouping list on the Product List toolbar.
The Add Product Group - Dynamic dialog box displays.
FIGURE 55 Add Product Group - Dynamic dialog box
3. Enter a unique name for the product group in the Name field.
4. Enter a description for the product group in the Description field.
5. Select the Topology Display Enable check box to display the product group in the L2 Topology
view.
6. Click Insert.
A new row displays in the Group Criteria table.
7. Select one of the following from the Property list:
• Name
• IP Address
• Product Type
• Serial #
• Status
• Vendor
• Model