Brocade Network Advisor IP User Manual v12.3.0 - Manual (Page 589)

Brocade Network Advisor IP User Manual 537
53-1003153-01
Performance management
14
“Displaying VLANs in the VLAN view” on page 953
“Displaying VLANs by products” on page 955
Performance management
NOTE
Wireless access points in adaptive mode do not display in the Management application.
Historical performance enables you to collect data from managed wireless devices. You can use
the provided data collectors or create your own data collectors.
Instructions for collecting historical performance data are detailed in “IP historical performance
monitoring” on page 1125.
Policy Monitors
Use this feature to provide best practice guidelines for network setup at the fabric, switch, port and
device level as well as software configurations at the product and the Management application
level.
Instructions for configuring policy monitors are detailed in Chapter 37, “Policy Monitor” and include
information about the following:
• “Adding a configuration policy manager” on page 1238
• “Editing a configuration policy manager” on page 1245
• “Configuration rules” on page 1246
• “Running a configuration policy manager” on page 1266
• “Viewing a configuration policy manager report” on page 1267
Fault management
Fault management enables you to monitor your network using the following methods:
• Monitor logs for specified conditions and notify you or run a script when the specified condition
is met.
• Create event-based policies, which contain an event trigger and action.
• Configure E-mail event notification.
Instructions for configuring fault management are detailed in Chapter 38, “Fault Management” .