Brocade Network Advisor IP User Manual v12.3.0 - Manual (Page 190)

136 Brocade Network Advisor IP User Manual
53-1003153-01
Server Data backup
5
FIGURE 56 Options dialog box (Server Backup pane)
3. Select the Enable Backup check box, if necessary.
4. Enter the time (using a 24-hour clock) you want the backup process to begin in the Next
Backup Start Time Hours and Minutes fields.
5. Select an interval from the Backup Interval drop-down list to set how often backup occurs.
6. Backup data to a hard drive by browsing to the hard drive and directory to which you want to
backup your data.
NOTE
This requires a hard drive. The drive should not be the same physical drive on which your
Operating System or the Management application is installed.
7. Backup data to a network drive by completing the following steps.
To backup to a network drive, your workstation can be either in the same domain or in the
same workgroup. However, you must have rights to copy files for the network drive.
NOTE
The Management application should not directly access local or network resources through
mapped drive letters. When the Management application must access a remote resource (or
any process that is running in a different security context), you should use the Universal
Naming Convention (UNC) name to access the resource. For more information about services
and redirected drives, refer to http://support.microsoft.com/kb/180362/en-us.
NOTE
Configuring backup to a network drive is not supported on UNIX systems.
NOTE
It is recommended that this configuration be completed on the Local client (the client
application running on the Server) so that the backup path and location can be confirmed.