Brocade Network Advisor IP User Manual v12.3.0 User Manual
Page 1512
1460
Brocade Network Advisor IP User Manual
53-1003153-01
IP device properties
E
Delete button
Click to delete a user-defined property. For more information, refer to
Nodes tab
Select to display information about nodes in the fabric. For detailed
information about this tab, refer to
“Viewing VCS fabric properties”
Port Profiles tab
Select to display information about port profiles for the fabric members.
For detailed information about this tab, refer to
Ports tab
Select to display information about ports on the device.
Show list
Select the port type you want to display. Options include:
•
All
•
Trunked Ports
•
ICLs
•
MCT Ports
Port Count
The number of ports in the group.
Port Actions list
Select to enable or disable port actions.
Performance list
Select to launch the Performance dialog box.
Identifier
The identifier of the port.
Name
The name of the port.
MAC Address
The MAC address of the port.
Port Status
The status of the port.
Port State
The state of the port.
Type
The port type.
Speed
The speed of the port.
L2/Tag Mode
Whether the port is tagged or untagged.
Untagged VLAN ID
The untagged VLAN identifier of the port.
Duplex Mode
The duplex mode of the port.
Role
The role of the port. Possible values include the following roles:
•
Fabric
•
Edge
•
Stacking
•
Peri Port
For MCT switches, the port role is either ICL or MCT.
Profile Mode
Displays the profile mode status of the port; for example, Enabled or
Disabled.
Active Profiles
Displays the active profiles associated with the port.
LAG/Trunk ID
Displays the LAG name and the trunk port identifier.
Attached MAC
Displays the MAC address of the attached device. The value is empty
when the port is not connected. The value contains a comma-separated
list of MAC address when more than one MAC address is found.
Stacking Port
Whether or not the port stacked.
TABLE 142
IP device and port properties (Continued)
Field/Component
Description