Brocade Network Advisor IP User Manual v12.3.0 User Manual
Page 932
880
Brocade Network Advisor IP User Manual
53-1003153-01
Change tracking
24
SFLO-1003
LOG
Indicates that the global sFlow sampling rate has been changed to the
specified value.
SFLO-1004
LOG
Indicates that the global sFlow counter sampling interval has been changed to
the specified value.
SFLO-1005
LOG
Indicates that the sFlow sampling rate has been changed on the specified
port.
SFLO-1006
LOG
Indicates that the sFlow polling interval has been changed on the specified
port.
SFLO-1007
LOG
Indicates that the specified sFlow collector is either configured or not
configured.
SFLO-1010
LOG
Indicates that the specified sFlow profile has been created.
SFLO-1011
LOG
Indicates that the specified sFlow profile has been deleted.
SFLO-1012
LOG
Indicates that the sampling rate has been updated for the specified sFlow
profile.
SNMP-1005 AUDIT
|
LOG
SNMP
configuration changed.
SNMP-1006
AUDIT | LOG
Indicates that the specified SNMP configuration group was reset to the factory
default.
SSMD-1400
LOG
Indicates that the specified access list has been created.
SSMD-1401
LOG
Indicates that the specified access list type and name has been recorded as a
reference for ACL binding in the future.
SSMD-1402
LOG
Indicates that the specified access list has been deleted.
SSMD-1403
LOG
Indicates that the access list name and type recorded for bind forward
reference has been deleted.
SSMD-1404
LOG
Indicates that the access list rules are added to or removed from an existing
policy.
SSMD-1406
LOG
Indicates that the specified access list has been removed from the interface.
SSMD-1407
LOG
Indicates that the specified access list has been configured on the interface.
SSMD-1408
LOG
Indicates that the specified rules are added to the access control list (ACL).
SSMD-1750
LOG
Indicates that the specified route map has been applied to the specified
interface.
SSMD-1752
LOG
Indicates that the specified route map has been removed from the specified
interface.
SSMD-1900
LOG
Indicates that a security sub-profile has been created for the specified
port-profile.
SSMD-1901
LOG
Indicates that the specified access control list (ACL) has been configured for
the security sub-profile.
SSMD-1902
LOG
Indicates that the specified access control list (ACL) has been removed from
the security sub-profile.
SSMD-1915
LOG
Indicates that the security sub-profile has been deleted.
SULB-1103
AUDIT | LOG
Indicates that firmware download has completed successfully on the
specified slot or partition.
SULB-1114
AUDIT | LOG
Indicates that firmware upgrade has completed.
TABLE 86
Configuration change events for Adaptive backup (Continued)
Message ID
Type
Description