Brocade Network Advisor IP User Manual v12.3.0 - Manual (Page 228)

174 Brocade Network Advisor IP User Manual
53-1003153-01
Software Configuration
5
5. Enter the memory allocation (MB) for the server in the Server Memory Allocation field.
If you enter an invalid value, an error message displays with the minimum value allowed. Click
OK and edit the value again.
The current configured number of megabytes for server memory allocation displays in the
Current Value field. The default minimum number of megabytes for server memory allocation
displays in the Default Minimum field. The IP address of the server displays in the Server IP
field. The server name displays in the Server Name field.
To support more than 8 clients on a 64-bit server, increase the memory allocation for the
server to 3076 MB.
Minimum values are as follows:
For a 32-bit Windows or Linux Server
• Professional: 768 MB
• Professional Plus: 1024 MB
• Enterprise Small: 768 MB
• Enterprise Medium: 1024 MB
• Enterprise Large: 1024 MB
Default values for IP only Server
Server Heap Size
For a 32-bit Windows or Linux Server
• Small : 768 MB
• Medium : 1024 MB
• Large : 1024 MB
For all 64-bit servers, the default minimum server heap size for all network sizes is 2048 MB.
NOTE
There is no restriction on the maximum value for server heap size in a 64-Bit server. The
correct server heap size value must be given according to the RAM present in the server.
6. Click Apply or OK to save your work.
NOTE
Changes to this option take effect after an application restart.
NOTE
You can only restart the server using the Server Management Console (Start > Programs >
Management_Application_Name 12.X.X > Server Management Console).
7. Click OK on the “changes take effect after application restart” message.