Brocade Network Advisor IP User Manual v12.3.0 User Manual
Page 1708
1656
Brocade Network Advisor IP User Manual
53-1003153-01
Database tables and fields
I
MAC_GROUP_DB_ID
Nullable Foreign Key Reference to ID field of
MAC_GROUP table. In case of VLAN_TYPE 3,
MAC_GROUP table entry created with empty
GROUP_ID with TYPE 3 and MAC_GROUP_MEMBER
have the mac address details. In case of VLAN_TYPE
4, MAC_GROUP table entry created with valid
GROUP_ID and TYPE(3).
int
CTAG_ID
This will be populated only if VLAN_TYPE is 6 and 7.
This as an Incoming customer tag (c-tag) associated
with a GVLAN and its applicable only for trunk mode.
If the TLS (Transparent LAN Service) is enabled in the
device, a pre-defined range of values are used for
C-Tag.
text
TABLE 312
PORT_VLAN
Field
Definition
Format
Size
VLAN_DB_ID
Database ID of the VLAN instance which is
associated with the port.
int
STP
STP value for VLAN. Possible values are 0-Disabled,
1-STP, 2-RSTP, 3-MSTP, 4-PVST and 5-RPVST.
num
(1,0)
TVF
0 means Disabled, 1 means Enabled. When TVF is
enabled, packets are allowed to be forwarded
without any form of CPU intervention including MAC
learning and MAC destination lookups. When it is
disabled (VLAN CPU Protection), it allows traffic
intended for pure Layer2.
smallint
VLAN_ID
The existing Data type short has been modified to
integer. Hence it supports 16 bit additionally.
smallint
QOS
Quality of service for port VLAN.
smallint
GLOBAL_VLAN_DB_ID
Database ID of the GLOBAL_VLAN instance which is
associated with the port.
int
STP_INSTANCE_ID
Database ID of the STP_INSTANCE instance which is
associated with the port.
int
ADMIN_STATUS
•
0 = Disabled
•
1 = Enabled
smallint
FCOE_ENABLED
Signifies whether this VLAN is the default FCoE VLAN
on the DCB switch.
smallint
PVLAN_TYPE
pvlan_type value for vlan.0- Normal VLAN. The
following are PVLAN Types applicable for NOS4.0 and
above.1- Primary PVLAN, 2- RSPAN, 3 -TLS..
int
TABLE 311
PORT_PROFILE_VLAN_MAP
Field
Definition
Format
Size