Brocade Network Advisor IP User Manual v12.3.0 - Manual (Page 656)

604 Brocade Network Advisor IP User Manual
53-1003153-01
DCB configuration
17
DCB configuration
To launch the DCB Configuration dialog box, select Configure > DCB from the menu bar.
The DCB Configuration dialog box displays, showing the status of all DCB-related hardware and
functions.
NOTE
For FOS DCB devices, the Protocol Down Reason column, shown in Figure 240 , displays the values
only for the external ports of embedded platforms but not for the internal ports.
FIGURE 240 DCB Configuration dialog box
Minimum DCB configuration for FCoE traffic
You must complete the following procedures to create the basic configuration of DCB for FCoE
traffic.
NOTE
This section is applicable for Fabric OS versions 6.3.0, 6.3.1, 6.3.2, 6.4.1, and 6.4.2. This section is
not applicable for Fabric OS versions 6.3.1_dcb, 6.3.1_cee, 6.4.1_fcoe, and 7.0.x.