Brocade Network Advisor IP User Manual v12.3.0 - Manual (Page 1067)

Brocade Network Advisor IP User Manual 1015
53-1003153-01
VPLS Manager
29
VPLS Manager
The VPLS Manager allows you to manage VPLS instances. You can perform the following tasks from
the VLL manager:
• View current VPLS instances and peer topologies.
• View VPLS configurations.
• Add, edit, duplicate, or delete VPLS instances.
NOTE
When configuring VPLS, a check is made to determine if there are LSPs configured for the target
products. You may proceed with configuration, but an LSP is needed for a working connection.
Viewing VPLS instances and peer topologies
To view currently defined VPLS instances and peer topologies, do the following:
1. Select Configure > MPLS > VPLS.
2. To view information about current VPLS instances, select the Views tab and the Details tab
( Figure 427 ).
FIGURE 427 VPLS Manager Views tab