Brocade Network Advisor IP User Manual v12.3.0 - Manual (Page 1290)

1238 Brocade Network Advisor IP User Manual
53-1003153-01
Adding a configuration policy manager
37
8. To view the report history for all configuration policy managers, click History (refer to “Viewing
historical reports for a configuration policy manager” on page 1271).
9. To view the report history for a selected configuration policy manager, select a configuration
policy manager and click History (refer to “Viewing historical reports for a configuration policy
manager” on page 1271).
10. Click Close on the Configuration Policy Manager dialog box.
Adding a configuration policy manager
To add a configuration policy manager, complete the following steps.
1. Select Monitor > Configuration Policy Manager.
The Configuration Policy Manager dialog box displays.
2. Click Add.
The Add Configuration Policy Manager dialog box displays ( Figure 526 ).
FIGURE 526 Add Configuration Policy dialog box, Fabric Checks tab
3. Enter a user-defined name for the policy in the Name field.
The name must be unique. It cannot be over 64 characters, nor can the field be empty. It
cannot include asterisks.
4. Enter a description of the policy in the Description field.
The description cannot be over 128 characters. It cannot include asterisks.
5. Click the Schedule Use check box and choose one of the following options:
• To use the default frequency (one time, runs at current system time plus fifteen minutes),
go to
step 6 .
• To configure the frequency, click the ellipsis button and choose one of the following
options to configure the frequency at which deployment runs for the configuration policy
manager:

To configure deployment to run only once, refer to “Configuring a one-time
configuration policy manager schedule” on page 1243.

To configure hourly deployment, refer to “Configuring an hourly configuration policy
manager schedule” on page 1244.

To configure daily deployment, refer to “Configuring a daily configuration policy
manager schedule” on page 1244.

To configure weekly deployment, refer to “Configuring a weekly configuration policy
manager schedule” on page 1244.

To configure monthly deployment, refer to “Configuring a monthly configuration policy
manager schedule” on page 1244.
6. To set configuration policy managers for fabrics, select the Fabric Checks tab and complete the
following steps.