Brocade Network Advisor IP User Manual v12.3.0 - Manual (Page 1040)

988 Brocade Network Advisor IP User Manual
53-1003153-01
LSP
29
8. Click Advanced Settings to establish traffic engineering parameters.
The RSVP LSP Advanced Settings dialog box has three tabs: Global, Paths, and Fast Reroute.
The default view is the Global tab (
Figure 405 ).
FIGURE 405 RSVP LSP Advanced Settings Global tab
From the Global tab you can set the following:
- Adaptive checkbox - Select the Adaptive checkbox to allow you to change parameters while
an LSP is in enabled state.
- Under Admin Groups settings use the Select buttons to use admin groups to manage CSPF
path selection by including or excluding network segments identified as admin groups. The
Admin Groups Selector dialog box displays (
Figure 406 ).
FIGURE 406 Admin Groups Selector dialog box