Management configuration policy manager, Preconfigured configuration policy managers, Preconfigured configuration policy managers 5 – Brocade Network Advisor IP User Manual v12.3.0 User Manual
Page 1287
Brocade Network Advisor IP User Manual
1235
53-1003153-01
Preconfigured configuration policy managers
37
Rule Violation Fix — If the configuration policy manager report shows a violation, the
Administrator can add redundant connections (either a host to attached fabrics or attached
fabrics to a target LUN or more inter-fabric routes) to establish a complete path from host to
target LUN.
Management configuration policy manager
The management configuration policy manager enables you to set a configuration policy manager
on the Management application.
Check to see if the server backup is enabled and working — This management configuration policy
manager enables you to determine if backup is enabled for the Management application server
and if the backup output directory is accessible and writable.
Server backup automatically backs up the Management application database on a user-defined
schedule.
Rule Violation Fix — If the configuration policy manager report shows a violation, the Administrator
can edit the backup configuration through the Options dialog box, Server Backup pane (Server >
Options). Refer to
Preconfigured configuration policy managers
The Management application provides preconfigured configuration policy managers. The
preconfigured configuration policy managers include the following:
-
Default IP Policy — Available for SAN products and contains the following values:
•
Name — Default IP Policy
•
Description — Default policy to run on all IP targets
•
Frequency — Daily
•
Next Run — Next time the policy will run using the format:
example, Fri Jun 08 08:00:00 PST 2014.
•
Last Run — Empty
•
Result — Empty
•
Rule — The default IP policy is configured with the following rules:
-
All profiles are the same on each RBridge in an Ethernet fabric
-
Event registration
-
Predefined rules – “No Interface Shutdown Rule” and “Port Profile Interface Rule”
-
Management application backup enabled
•
Targets — The default IP policy is configured with the following targets:
-
Fabric Checks — All Fabrics
-
Switch/Router Checks — IP Wired Products and Wireless Controllers product groups