Brocade Network Advisor IP User Manual v12.3.0 - Manual (Page 411)

Brocade Network Advisor IP User Manual 359
53-1003153-01
Performance monitors
8
• Connected_Port_Link (where Connected_Port_Link is Connected Port, Initiator, or Target) —
Displays one of the following:
- Connected Port — The ISL or IFL port on the connected device. Click to launch the switch
port properties dialog box.
- Initiator — The initiator port on the connected device. Click to launch the device properties
dialog box.
- Target — The target port on the connected device. Click to launch the device properties
dialog box.
• Too Long Errors — The number (error count) of frames longer than the maximum frame size
allowed errors for the duration specified in the monitor.
• Too Long Errors/sec — The number (error rate) of frames longer than the maximum frame size
allowed errors per second for the duration specified in the monitor.
• Product — The product affected by this monitor.
• Type — The type of port (for example, U-Port).
• Identifier — The port identifier.
• Port Number — The port number.
• State — The port state (for example, Enabled).
• Status — The port status (for example, Up).
• Refreshed — The time of the last update for the monitor.
To edit a port performance monitor, refer to “Editing a preconfigured performance monitor” on
page 370.
Top Port Traffic monitor
The Top Port Traffic monitor ( Figure 161 ) displays the top ports with receive and transmit traffic in a
table.
FIGURE 161 Top Port Traffic monitor
The Top Port Traffic monitor includes the following data: