Brocade Network Advisor IP User Manual v12.3.0 User Manual
Page 1651
Brocade Network Advisor IP User Manual
1599
53-1003153-01
Database tables and fields
I
FCF_FCMAP
FC Map value of port. Currently not used.
varchar
256
FCF_FPMA_MAC
FPMA (fabric-provided MAC address) MAC address of
port. Currently not used.
varchar
64
FCF_MAC
FCF (FCoE Forwarder) MAC value of port.
varchar
64
FCF_MODE
FCF (FCoE Forwarder) Mode of the port. Currently not
used.
varchar
256
FCF_NAMEID
FCF (FCoE Forwarder) Name of the port currently Not
used.
varchar
256
FCPIM_MPIO_MODE
Indicates whether multipathing I/O (MPIO) mode is
turned on or off. 1- on, 0 - off
smallint
PORT_LOG_ENABLED
True if port log is enabled.
smallint
MAX_FRAME_SIZE
The frame size, in bytes, of the FCoE port.
int
MTU
Maximum transmission unit in bytes of the FCoE port.
Default - 2112, 0 - auto
int
PATH_TOV
The value between 0 and 60 that specifies the
time-out session.
NOTE: You can only enable or edit the path time out
when MPIO is disabled
int
SCSI_QUEUE_DEPTH
The LUN queue depth feature determines how many
concurrent IOs the adapter will accept and process
per LUN (not at the adapter port level, as with the IO
throttle value). Not setting the queue depth to the
optimal level can result in poor performance, where
outstanding IO queuing can cause bottlenecks. For
optimum performance, consider both the
configuration settings of the HBA and the physical
limits on the storage array. If you set the queue depth
too low on the HBA it could lead to under-utilization of
storage resources.
NOTE: The Queue Depth feature is supported for all
adapter classes configured in FC or FCoE
mode (Windows operating systems only)'
int
STATE
The state of the FCoE port (online or offline).
varchar
64
SUPPORTED_CLASS
The classes supported on the FCoE port.
For example, Class2 and Class3.
varchar
256
TRL_SPEED
TRL (Target Rate limit) speed. This will be less than
max speed supported by this port.
int
TRL_STATE
TRL (Target Rate limit) state of the port. Possible
values are 0 - disable , 1 - Enable
smallint
PG_ID
The priority group ID. Possible values are 0-7
(user-definable) and 15.0-15.7 (strict priority).
varchar
32
PRIORITIES
'Lists the available priorities (High, Medium, Low).
varchar
128
FCOE_MAC
FCOE MAC address of the port.
varchar
64
IOC_ID
The IO controller Identifier.
int
TABLE 173
HBA_PORT_FCOE_DETAILS (Continued)
Field
Definition
Format
Size