Brocade Network Advisor IP User Manual v12.3.0 - Manual (Page 1537)

Brocade Network Advisor IP User Manual 1485
53-1003153-01
CLI Templates
G
• IronWare OS VLAN – Configure virtual routing interface . . . . . . . . . . . . . 1497
• IronWare OS VLAN – Enable Spanning Tree Protocol on IOS VLAN . . . . . 1497
• IronWare OS VLAN – Disable Spanning Tree Protocol on IOS VLAN. . . . 1498
• Network OS VLAN – VLAN Interface Creation . . . . . . . . . . . . . . . . . . . . . 1498
• Network OS VLAN – VLAN Interface Deletion . . . . . . . . . . . . . . . . . . . . . 1498
• Network OS VLAN – Layer2 Switch Port Configuration . . . . . . . . . . . . . . 1498
• Network OS VLAN – Trunk Interface Configuration with allowed VLAN list 1498
• Network OS VLAN – Configure Layer2 Interface as an Interface Port . . 1498
• Network OS VLAN – Native VLAN Configuration . . . . . . . . . . . . . . . . . . . 1498
• Network OS VLAN – Disable Native VLAN Configuration . . . . . . . . . . . . 1499
• Network OS VLAN – Access Interface Configuration. . . . . . . . . . . . . . . . 1499
• Network OS VLAN – Disable Access Interface Configuration . . . . . . . . . 1499
• Network OS VLAN – Enable Spanning Tree Protocol on NOS VLAN . . . . 1499
• Network OS VLAN – Disable Spanning Tree Protocol on Network OS VLAN 1499
TABLE 14 HyperEdge – Stack Enable
Feature Description CLI Commands
HyperEdge To enable stacking mode. stack enable
TABLE 15 HyperEdge – Stack Disable
Feature Description CLI Commands
HyperEdge To disable stacking mode. stack disable
TABLE 16 HyperEdge – Stack Port Creation
Feature Description CLI Commands
HyperEdge To create stacking ports. stack unit $
stack-port $
$
TABLE 17 HyperEdge – Stack Port Deletion
Feature Description CLI Commands
HyperEdge To delete stacking ports. stack unit $
no stack-port $
$
TABLE 18 HyperEdge – Stack Trunk Creation
Feature Description CLI Commands
HyperEdge To create stacking trunks. stack unit $
stack-trunk $ to
$