Brocade Network Advisor IP User Manual v12.3.0 - Manual (Page 122)

68 Brocade Network Advisor IP User Manual
53-1003153-01
IP discovery profiles
3
To configure a discovery profile, complete the following steps.
1. Select Discover > IP Products.
The Discover Setup - IP dialog box displays.
2. Click the Profiles tab
FIGURE 21 Profile tab
3. Click Add.
A new row (named “new_profile”) displays in the Discovery Profiles table.
4. Click “new_profile” in the Profile Name field to enter a unique name for the profile.
This name can be from 1 through 255 characters long, case sensitive, and allows all printable
ASCII characters.
5. Click the Address Ranges tab to configure address ranges for the profile.
For step-by-step instructions, refer to “Configuring address ranges” on page 70.
6. Click the Scheduling tab to configure a discovery schedule for the profile.
For step-by-step instructions, refer to “Scheduling discovery” on page 75.
7. Click the Preferences tab to configure preferences for the profile.
For step-by-step instructions, refer to “Configuring advanced discovery profile preferences” on
page 82.
8. Click the Global Settings tab.
To set SNMP credentials, refer to “IP SNMP credentials” on page 50.