Brocade Network Advisor IP User Manual v12.3.0 - Manual (Page 908)

856 Brocade Network Advisor IP User Manual
53-1003153-01
sFlow
23
sFlow
The IP Element Manager supports sFlow to capture traffic data and configure sFlow collector.
Configuring sFlow in Element Manager
1. Click the Configure icon in the Element Manager toolbar.
2. Select sFlow (as shown in Figure 338 ).
or
To access the sFlow from Element Manager, right-click a module (or modules), trunk (or
trunks), or port (or ports) and select sFlow.
FIGURE 338 sFlow dialog box
3. To configure sFlow, refer to “Configuring sFlow” on page 1149.
VRRP-E: VRRP/ VRRP-E management
The IP Element Manager supports VRRP for MLX devices only. The VRRP management is supported
in MLX Element Manager using the CLI Configuration Manager. When you launch the VRRP/VRRP-E
dialog box, the existing VRRP configuration for the selected MLX device is displayed.
Configuring a VRRP/VRRP-E router
1. Click the Configure icon in the Element Manager toolbar.
2. Select VRRP/VRRP-E (as shown in Figure 339 ).