Brocade Network Advisor IP User Manual v12.3.0 - Manual (Page 929)

Brocade Network Advisor IP User Manual 877
53-1003153-01
Change tracking
24
FABR-1014 LOG Indicates that the switch received an RBridge ID other than the one it
requested. The port was disabled because the requested insistent RBridge ID
could not be obtained.
FABR-1030 LOG Indicates that the RBridge ID has changed.
FABR-1041 LOG Indicates that a link reset was received before the completion of the trunking
protocol on the port.
FCOE-1035 LOG Indicates an administrative action on the Fibre Channel over Ethernet (FCoE)
port.
FCOE-1036 LOG Indicates an administrative action on the Fibre Channel over Ethernet (FCoE)
port.
HASM-1110 LOG Indicates that configuration replay has completed.
IPAD-1000 LOG Switch IP change.
IPAD-1002 AUDIT | LOG Switch name has been successfully changed to <Switch name>.
LOG-1008 LOG Indicates that the specified module has been disabled from logging.
LOG-1009 LOG Indicates that the specified module has been enabled for logging.
LOG-1012 LOG Indicates that the severity level of the specified log message has been
changed.
NSM-1001 DCE Indicates that the specified interface has come online after the protocol
dependencies are resolved.
NSM-1004 DCE Indicates that the specified logical interface has been created.
NSM-1009 DCE Indicates that the specified logical interface has been deleted.
NSM-1010 DCE Indicates that the interface mode has been changed.
NSM-1011 DCE Indicates that the interface operational endpoint mode has been changed.
NSM-1012 DCE Indicates that the specified VLAN classifier group has been created.
NSM-1013 DCE Indicates that the specified VLAN classifier group has been deleted.
NSM-1014 DCE Indicates that the specified VLAN classifier rule has been created.
NSM-1015 DCE Indicates that the specified VLAN classifier rule has been deleted.
NSM-1016 DCE Indicates that the specified VLAN classifier group has been modified.
NSM-1017 DCE Indicates that the specified logical interface member list has been changed.
NSM-1018 LOG Indicates that the VLAN membership has been changed for the specified
interface.
NSM-1019 DCE Indicates that the interface administrative status has changed to up.
NSM-1020 DCE Indicates that the interface administrative status has changed to down.
NSM-1022 DCE Indicates that the Fibre Channel over Ethernet (FCoE) configuration has been
enabled or disabled on the specified interface.
NSM-1038 DCE Indicates that the interface private VLAN mode has been changed.
NSM-2000 DCE Indicates that the profile activation was successful.
NSM-2002 DCE Indicates that the profile deactivation was successful.
NSM-2004 DCE Indicates that the profile application was successful.
TABLE 86 Configuration change events for Adaptive backup (Continued)
Message ID Type Description