Brocade Network Advisor IP User Manual v12.3.0 - Manual (Page 1513)

Brocade Network Advisor IP User Manual 1461
53-1003153-01
IP device properties
E
MCT Client Name The MCT client name.
Access Points tab Select to display information about access ports (APs) connected to the
device.
Connected AP count Number of APs connected to the controller or switch.
Managed AP count Only applicable to the selected controller. Number of APs that the
selected controller manages.
Name The device name used to identify the AP.
Device MAC The AP device MAC address.
Model The model of the AP.
Serial Number The serial number of the AP.
Firmware version The firmware level of the AP.
Status The status of the AP.
Controller \ Port The IP address of the controller or switch connected to the AP. Also
displays the port number if the AP is directly connected.
Connected switch \ Port The IP address of the switch connected to the AP. Also displays the port
number if the AP is directly connected.
Profile Name AP profile name.
RF Domain Name The RF domain name set for the AP.
Location Location set for the AP.
Contact Contact set for the AP.
Time Zone The time zone set for the AP.
Country The country set for the AP.
VLAN for Control Traffic The VLAN for control traffic set for the AP.
Client count The number of wireless clients or stations connected or associated to
the AP.
IP Address The IP address of the AP.
SFP/Port Optics tab Select to display the details of all the SFP and port optics.
NOTE: To export the SFP details, click the link under the Physical Ports -
SFP Details section of Detailed Report.
TX Power The power transmitted by the port in a device.
RX Power The power received by the port in a device.
Transceiver Temperature The temperature of the port, in Celsius.
TX Bias Current The current supplied to the SFP transceiver.
NOTE: To export power supply details, click the link under the
Chassis-Power Supply section of Detailed Report.
Wavelength The wavelength of the port.
Serial # The number to identify the port.
Media The type in which the port is present.
TABLE 142 IP device and port properties (Continued)
Field/Component Description