Brocade Network Advisor IP User Manual v12.3.0 - Manual (Page 1334)

1282 Brocade Network Advisor IP User Manual
53-1003153-01
SNMP traps
38
FIGURE 538 SNMP Trap Forwarding dialog box
Adding a trap destination
The Add Trap Destination dialog box allows you to configure destinations for forwarding SNMP
traps.
To add a trap destination, complete the following steps.
1. Select Monitor > SNMP Setup > Trap Forwarding.
The SNMP Trap Forwarding dialog box, shown in Figure 538 , displays.
2. Select the Enable trap forwarding check box.