Brocade Network Advisor IP User Manual v12.3.0 - Manual (Page 1744)

1692 Brocade Network Advisor IP User Manual
53-1003153-01
Database tables and fields
I
MAX_FRAME_MONITOR Maximum frame monitor supported for switch port. int
MAX_FRAME_MONITOR_OF
FSET Maximum offset supported in fame monitor for
switch port. int
Contains the features supported as a bit mask at
port level. int
IDENTIFIER Switch port identifier extracted from interface name char 80
PORT_CAPABILITIES 'List of capabilities of this port specified as bit mask.
Each bit would represent capability like FEC,
Encryption and compression, NPIV etc.'; int
XISL_PORT_LIST This field is applicable only for logical ports created
for LISLs. It denotes the list of XISL ports associated
with the current logical port. Will be blank for
non-logical ports. varchar 256
PORT_COMMISSION_STATE Indicates whether port decommission/recommission
was in progress or completed, based on this status
we will show the decommission/recommission icon
on ports and Indicates the
Decommissioned/Recommissioned status of the
ports which was performed from the Management
application.
None - 0, Decommission In Progress - 1 ,
Decommissioned - 2,
Recommission In Progress - 3, Recommissioned - 4.
If the decommission is performed through CLI or
other Management application server then the state
would be None (0).
int
FEATURES_ENABLED Holds as a bit mask the features that are enabled .
Refer FEATURES_ACTIVE for the active/inactive
status of a feature. Each bit would represent features
like Encryption, compression etc.' The bit mask and
their corresponding Features are defined as an enum
in the domain model class - SwitchPort.java. int
FEATURES_ACTIVE Holds as a bit mask the features that are active.
Please note that this is different from the enabled
value which is found in the FEATURES_ENABLED
column. Each bit would represent features like
Encryption, compression etc. The bit mask and their
corresponding Features are defined as an enum in
the domain model class - SwitchPort.java. int
DISABLED_REASON The Switch Port disabled reason. varchar 1024
FENCED 1 means port is fenced. smallint
MASTER_PORT_NUMBER This column will have the trunk master port number
for the trunk members.
For trunk master, it will have its own port number.
For non-trunk ports, it will have the default value -1. int
TABLE 395 SWITCH_PORT (Continued)
Field Definition Format Size