Performance monitors – Brocade Network Advisor IP User Manual v12.3.0 User Manual
Page 289
Brocade Network Advisor IP User Manual
235
53-1003153-01
Dashboard customization
7
•
SFP Temperature — The physical temperature of the SFP transceiver, in degrees Celsius.
•
SFP Power On Hours — The number of hours the 16 Gbps SFP transceiver is powered on.
•
Refreshed — The time of the last update for the widget.
Network OS Fabric Watch violations with appropriate counter values are displayed for the following
categories.
•
Abnormal Frame Terminations — The number of frames abnormally terminated.
•
Symbol Errors — The number of undefined or invalid symbols received.
•
IFG (InterFrame Gap) Errors — The interframe gap between successive frames that is violated.
Customizing the Port Health Violations widget
You can customize the widget to display violations for a specific fabric and time frame.
•
To display data for a specific fabric or group, refer to
•
To display data for a specific duration, refer to
•
Sort the contents by clicking the column header. Click the same column header again to
reverse the sort order.
Performance monitors
The Management application provides the following preconfigured performance monitors:
TABLE 22
Preconfigure performance monitors
Monitor title
Description
Data collectors
Top Port Alignment Errors
Table view of the alignment errors measure
All SAN TE port collector
Top Port C3 Discards
Table view of the C3 discards measure
All SAN FC port collector
Top Port C3 Discards RX TO
Table view of the C3 discards RX TO measure. There are
four versions of this monitor based on the type of port: All
ports, initiator ports, ISL ports, and Target ports.
All SAN FC port collector
Top Port CRC Errors
Table view of the CRC errors measure. There are four
versions of this monitor based on the type of port: All
ports, initiator ports, ISL ports, and Target ports.
All SAN FC port collector, All SAN TE port
collector
Top Port Encode Error Out
Table view of the encode error out measure. There are four
versions of this monitor based on the type of port: All
ports, initiator ports, ISL ports, and Target ports.
All SAN FC port collector
Top Port Errors
Table view of the errors measure
Port error count collector
Top Port Overflow Errors
Table view of the overflow errors measure
All SAN TE port collector
Top Port Receive EOF
Table view of the received end-of-frames measure
All SAN TE port collector
Top Port Runtime Errors
Table view of the runtime errors measure
All SAN TE port collector
Top Port Sync Losses
Table view of the top port synchronization losses. There
are four versions of this monitor based on the type of port:
All ports, initiator ports, ISL ports, and Target ports.
All SAN FC port collector
Top Port Too Long Errors
Table view of the too long errors measure
All SAN TE port collector
Top Port Traffic
Table view of the traffic measure
All SAN FCIP tunnel collector, All SAN FC port
collector, port throughput collector, All SAN
TE port collector