Brocade Network Advisor IP User Manual v12.3.0 User Manual
Page 156
102
Brocade Network Advisor IP User Manual
53-1003153-01
Host discovery
3
2. Click Add.
The Add Host Adapters dialog box displays.
FIGURE 48
Add Host Adapters dialog box
3. Enter a discovery request name (such as MyFabric) in the Discovery Request Name field.
4. Select Hosts in Fabrics from the list.
5. Select All fabrics or an individual fabric from the host list.
6. Click Add.
All hosts that are part of a managed fabric and have a registered host name display in the host
list. If no host with a registered host name exists, an error message displays. Click OK to close
the error message.
7. Configure Host credentials by choosing one of the following options:
•
To configure HCM agent credentials, select the HCM agent option. Go to
•
To configure CIM server credentials, select the CIM server (ESXi only) option. Continue with
•
To configure WMI server credentials, select the Windows Management Instrumentation
(WMI) option. Continue with
.
If you do not need to configure Host credentials, skip to
8. Configure discovery authentication by choosing one of the following options:
•
To configure discovery with authentication, select the HTTPS option in Protocol
•
To configure discovery without authentication, select the HTTP option in Protocol.
9. Enter the port number in the Port field.
The HCM agent default is 34568. The CIM server HTTPS default is 5989. The CIM server HTTP
default is 5988. The WMI HTTPS default is 5986. The WMI HTTP default is 5985.
10. Enter your user name in the User ID field.