Brocade Network Advisor IP User Manual v12.3.0 - Manual (Page 1289)

Brocade Network Advisor IP User Manual 1237
53-1003153-01
Viewing existing configuration policy managers
37
FIGURE 525 Configuration Policy Manager dialog box
2. Review the configuration policy manager details:
• Name — The user-defined name of the policy.
• Description — A description of the policy.
• Alert — Select to receive e-mail alerts and have the configuration policy manager status
icon display in the status bar when the monitor fails or partially fails.
• Frequency — The frequency (one time, hourly, daily, weekly, or monthly) at which the policy
is scheduled.
• Next Run — The time the policy will run again.
• Last Run — The time the policy ran last.
• Result — The result of the last configuration policy manager run. There are four possible
results: Passed, Partially Failed, Failed, and Not Applicable.
• Acknowledged — Whether the policy is acknowledged or not. Select the check box to
acknowledge the policy. Disabled when the associated Acknowledged check box is
cleared.
3. To add a configuration policy manager, click Add (refer to “Adding a configuration policy
manager” on page 1238).
4. To edit the selected configuration policy manager, click Edit (refer to “Editing a configuration
policy manager” on page 1245).
5. To delete the selected configuration policy manager, click Delete (refer to “Deleting a
configuration policy manager” on page 1245).
6. To run the selected policy and view the report, click Run (refer to “Running a configuration
policy manager” on page 1266).
7. To open the last executed report for a selected configuration policy manager, select a
configuration policy manager and click Report (refer to “Viewing a configuration policy
manager report” on page 1267).