Nortel Networks 8000 - Manual (Page 93)

4 POS and CPOS interface configuration
Nortel Secure Router 8000 Series
Configuration -WAN Access
Configure Router A.
# Create a channel on the CPOS interface.
system-view
[RouterA] controller epos 3/0/1
RouterA-Cpos3/0/1] clock master
RouterA-Cpos3/0/1] e1 1 unframed
RouterA-Cpos3/0/1] e1 2 unframed
RouterA-Cpos3/0/1] e1 3 unframed
RouterA-Cpos3/0/1] e1 4 unframed
RouterA-Cpos3/0/1] e1 1 set clock master
RouterA-Cpos3/0/1] e1 2 set clock master
RouterA-Cpos3/0/1] e1 3 set clock master
RouterA-Cpos3/0/1] e1 4 set clock master
RouterA-Cpos3/0/1] quit
# Configure a bundle group, specify it as the high-speed MP-group, and configure the
terminal authenticator.
[RouterA] interface mp-group 0/0/3
[RouterA-Mp-group0/0/3] hic-bind enable
[RouterA-Mp-group0/0/3] discriminator
[RouterA-Mp-group0/0/3] quit
# Bind the channel to the bundle group.
[RouterA] interface serial 3/0/1/1:0
[RouterA-Serial3/0/1/1:0] ppp mp mp-group 0/0/3
[RouterA-Serial3/0/1/1:0] quit
[RouterA] interface serial 3/0/1/2:0
[RouterA-Serial3/0/1/2:0] ppp mp mp-group 0/0/3
[RouterA-Serial3/0/1/2:0] quit
[RouterA] interface serial 3/0/1/3:0
[RouterA-Serial3/0/1/3:0] ppp mp mp-group 0/0/3
[RouterA-Serial3/0/1/3:0] quit
[RouterA] interface serial 3/0/1/4:0
[RouterA-Serial3/0/1/4:0] ppp mp mp-group 0/0/3
[RouterA-Serial3/0/1/4:0] quit
# Restart the channel.
[RouterA]
[RouterA-
[RouterA-
[RouterA-
[RouterA]
[RouterA-
[RouterA-
[RouterA-
[RouterA]
[RouterA-
[RouterA-
[RouterA-
[RouterA]
[RouterA-
[RouterA-
[RouterA-
0] shutdown
0] undo shutdown
0] quit
0] shutdown
0] undo shutdown
0] quit
interface serial 3/0/1/1:0
Serial3/0/1/1
Serial3/0/1/1
Serial3/0/1/1
interface serial 3/0/1/2:0
Serial3/0/1/2
Serial3/0/1/2
Serial3/0/1/2
interface serial 3/0/1/3:0
Serial3/0/1/3
Serial3/0/1/3
Serial3/0/1/3
interface serial 3/0/1/4:0
Serial3/0/1/4
Serial3/0/1/4
Serial3/0/1/4
0] shutdown
0] undo shutdown
0] quit
0] shutdown
0] undo shutdown
0] quit
4-32 Nortel Networks Inc. Issue 5.3 (30 March 2009)