Nortel Networks 8000 - Manual (Page 128)

6 PPP and MP configuration
Nortel Secure Router 8000 Series
Configuration -WAN Access
Section Description
6.8 Configuring MP binding
using the MP-group
This section describes how to configure MP binding by
using MP-group.
See Example for binding MPs into the MP-group.
6.9 Configuring MP limiting
parameters
This section describes how to configure MP parameters.
6.10 Configuring MP fragment
function
This section describes how to configure the MP fragment
function.
6.11 Maintaining PPP and MP This section describes how to maintain PPP and MP.
6.12 Configuration examples This section provides several configuration examples of
PPP and MP.
6.13 Troubleshooting This section describes how to diagnose and remove PPP
and MP faults.
6-2 Nortel Networks Inc. Issue 5.3 (30 March 2009)