Nortel Networks 8000 - Manual (Page 484)

Nortel Secure Router 8000 Series
Configuration -WAN Access______
Index
A
assigning a X.21 address. see setting aX.21 address
ATM
configuring loopback, 11-8
ATM application overview, 10-5, 11-4
ATM E3 interface
frame format, 10-10
loopback, 10-11
scramble function, 10-11
ATM overview, 10-3, 11-2
C
configuring ATM interface, 10-7, 11-4
configuring CE1 channels of CE3 interfaces, 3-22
configuring CE1 interfaces, 3-9
configuring CE3 interfaces, 3-20
configuring CHAP authentication, 6-12
configuring CT1 interfaces, 3-14
configuring E1 interfaces, 3-5
configuring E1/T1 of CPOS interfaces, 4-18
configuring frame relay, 8-9
configuring frame relay compression, 8-32
configuring frame relay switching, 8-23
configuring HDLC, 9-2
configuring IPoA, 10-16, 11-9
configuring link layer protocol, 2-4, 2-11
configuring MFR, 8-16
configuring MP authentication, 6-29
configuring PAP authentication, 6-9
configuring POS interfaces, 4-9
configuring PPPoE, 12-5
configuring STM-1 CPOS interfaces, 4-15
configuring synchronous serial interface, 2-3
configuring synchronous serial interfaces, 3-26, 4-23
CPOS interface
AUG multiplexing, 4-18
cT1 interface
clock mode, 3-17
coding/decoding format, 3-16
frame format, 3-17
D
debugging frame relay and MFR, 8-45
E
E1/cE1 interface
cable mode, 3-8, 3-13
E1/T1 channel
clock mode, 4-21
frame format, 4-21
E3/cE3 interface
clock mode, 3-21
clock mode, 3-24
enabling PPPoE, 12-4
encapsulating
LAPB, 7-10
X.25, 7-14
encapsulating HDLC, 9-2
F
FR LMI type, 8-21
FR switching configuring, 8-23
H
HDLC
encapsulating, 9-2
polling interval, 9-4
I
interface list, 1-2
L
LAPB
configuring parameter, 7-10
encapsulating, 7-10
M
MTU
Issue 5.3 (30 March 2009) Nortel Networks Inc. i-1