Nortel Networks 8000 - Manual (Page 53)

Nortel Secure Router 8000 Series
Configuration -WAN Access 2 Serial interface configuration
By default, the length of the CRC check word is 16 bits.
—End
2.2.10 Checking the configuration
Run the following commands to check the previous configuration.
Action Command
Check the status and statistics of a
serial interface. display interface serial [ interface-number ]
[ verbose ] [ | { begin | exclude | include }
regular-expression ]
Check the network layer
configuration and statistics of a
serial interface.
display ip interface brief serial interface-number
Run the display interface serial command to view the status and statistics of the interface.
For example:
display ip interface serial 6/0/0
Serial7/0/0 current state : DOWN
Line protocol current state : DOWN
Description : NORTEL, Nortel Series, Serial7/0/0 Interface
The Maximum Transmit Unit is 1500 bytes, Hold timer is 10(sec)
Internet protocol processing : disabled
Link layer protocol is PPP
LCP initial
QoS max-bandwidth : 64 Kbps
Output queue : (Urgent queue : Size/Length/Discards) 0/50/0
Output queue : (Protocol queue : Size/Length/Discards) 0/1000/0
Output queue : (FIFO queue : Size/Length/Discards) 0/256/0
Physical layer is synchronous,Baudrate is 0 bps, Interface is no cable
300 seconds input rate 0.00 bytes/sec, 0.00 packets/sec
300 seconds output rate 0.00 bytes/sec, 0.00 packets/sec
Usage of input bandwidth: 0.00%, Usage of output bandwidth: 0.00%
0 packets input, 0 bytes, 0 no buffers
0 packets output, 0 bytes, 0 no buffers
0 input errors, 0 CRC, 0 frame errors
0 overrunners, 0 aborted sequences, 0 input no buffers
DCD=DOWN DTR=DOWN DSR=DOWN RTS=DOWN CTS=DOWN
Run the display ip interface brief command to view the IP configuration of the interface. For
example:
display ip interface brief serial 6/0/0
*down: administratively down
(l): loopback
(s): spoofing
Interface IP Address Physical Protocol Description
Serial6/0/0 10.1.1.1 UP UP NORTEL
Issue 5.3 (30 March 2009) Nortel Networks Inc. 2-9