Nortel Networks 8000 User Manual
Page 292
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
8 Frame relay configuration
Nortel Secure Router 8000 Series
Configuration -WAN Access
Section
Description
switching
This section describes how to configure the PVC backup
and tunnel interface backup of FR.
See:
• Example for configuring the PVC backup of frame
relay switching.
• Example for configuring the backup of frame relay over
IP.
This section describes how to configure FR over IP.
See Example for configuring frame relay over IP.
FRF.9 compression
This section describes how to configure P2P and P2MP
FR compression.
See Example for configuring the frame relay frf9
compression.
IP header compression
This section describes how to configure FR IP header
compression.
and MFR bundle Link
This section describes how to configure MFR binding and
MFR bundle link.
restriction parameters
This section describes how to MFR fragmentation and
sliding window.
8.13 Maintaining frame relay
and MFR
This section describes how to maintain FR and MFR.
8.14 Configuration examples
This section provides several configuration examples of
FR.
8.15 Troubleshooting
This section describes how to diagnose and remove FR
faults.
8-2
Nortel Networks Inc.
Issue 5.3 (30 March 2009)